Save energy
How does it work?
How warm a room feels depends not only on the air temperature – but above all on the surfaces around it.
Calculation and reality often differ
About 60 years ago, building heating largely switched from radiant heat (stove heating) to convective heat (central hot-water heating). Since then, it is mainly the room air that is heated. Insulation, double-glazed windows and ventilation systems have improved thermal protection – but they also raise new questions, for example about moisture in building components and about the indoor climate.
To calculate heat demand, building physics assumes steady-state conditions: the U-value describes an equilibrium at constant temperatures, as reproduced in the laboratory. In everyday life, wind, moisture and solar radiation also act on the building envelope – and have a considerable influence on actual heating energy consumption.
Dry building components can be heated
The prerequisite for heating cost-saving alternatives is to create dry and therefore heatable building components. Contrary to conventional heating systems, in which warm air is generated in living spaces, the temperatures of the surfaces inside the outer walls have to be raised.
Wherever there are people, animals and plants, wherever climatic conditions determine our lives, it is transient and dynamic conditions that lead to heat loss in buildings.
Regulate humidity. Temper surfaces. Reflect heat.
The simplest objective — and the thread running through every product.
The explanatory video
Problem and solution at a glance
Arrange an introductory call
We look at your house, work through the comparison and tell you which building blocks pay off in your case — and which do not.